[Elecraft] K2/100 Amp Keying Limits?

[Mike Cizek W0VTT]

Hello Eric,

It's in theKPA100 manual, at the back under Specifications:

DC relay coil pulled to ground
1A at 200 VDC  (do not use with AC-controlled relay)

P59 in my book, which I just noticed, comes right after p62.....

----
73,
Mike Cizek W0VTT

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of eric norris via Elecraft
Sent: Tuesday, 16 March, 2021 21:11
To: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: [Elecraft] K2/100 Amp Keying Limits?

Can anyone tell me what the external amplifier keying limits are for a K2/100?  I'm trying to use an AL811H, which has 14.5V at 10ma on the relay jack.  Do I need an external interface?  I cannot find the answer in the K2/100 manual.  Thanks!

73, Eric WD6DBM

  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to mgcizek at gmail.com