[Elecraft] K4 observation

[David Gilbert]

Does any of that mitigate the Pin 1 problem that K9YC keeps pointing 
out?  At first glance it doesn't appear to me that it would.

Dave   AB7E



On 6/18/2021 7:33 PM, Wayne Burdick wrote:
> John,
>
> If the K4 is *off*, then there's no active circuitry involved. However, the headphone plug-insertion detect circuit may involve an IC downstream that could include a schottky diode junction -- a potential way a very strong signal could be rectified right at the radio end of the cable. We're looking at that.
>
> If the cable is not very well shielded, and the TV station is *very strong*, I can imagine modern physics just barely covering this situation. It would help if the headphone cable was about the length of an end-fed dipole at the station's frequency.
>
> As for the K4 chassis itself: It's very well sealed (far better than the K3/K3S).
>
> Wayne
> N6KR
>
>
>
>> On Jun 18, 2021, at 3:36 PM, John Harper <johnae5x at gmail.com> wrote:
>>
>> https://www.youtube.com/watch?v=u1XRaNpgQDI
>>
>> John AE5X
>> https://ae5x.blogspot.com
>>
>>> Noticed that when the antenna are disconnected, and the K4 turned off, I hear a local TV station in the headphones… Never happened on the K3.
>> ______________________________________________________________
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ab7echo at gmail.com