[Elecraft] KAT500 Tuner antenna selection stuck in #2 position

[Lance HP]

Thanks Andy.
"Last resort" tried and in the factory default configuration, the 
antenna ports are changeable.
Restored my saved configuration and it is back to only #2 antenna port - 
no other ports are selectable. Very strange....must be one of those 
"easter eggs" buried in a menu or something.

I'll contact Elecraft *again*. Hopefully I can get someone to talk to 
about the issue. I am surprised I am the only one who has seen this 
issue.

Lance, KK4DX
------ Original Message ------
From: "Andy Durbin" <a.durbin at msn.com>
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: 6/14/2021 9:53:52 AM
Subject: Re: [Elecraft] KAT500 Tuner antenna selection stuck in #2 
position

>"haven't tried to erase all my settings and revert back to factory default settings...yet. I was only going to do that as a last resort."
>
>There is no reason this should be "last resort".  Save the current configuration, test with factory default configuration, then restore saved configuration.
>
>If default config does not exhibit the problem then you should send the problem configuration to Elecraft support together with an exact series of steps required to reproduce the problem.
>
>73,
>Andy, k3wyc
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to lstronk at optonline.net