[Elecraft] KPA500 with Icom 7300

[Ad4K - Steven]

Thanks Ken.  Your advice is helpful. I have set the transmit delay to 15ms.

I have found lots of info on using the IC7300 with the KAT500/KPA500
combination but none on using the setup that I have, ie., IC7300 exciter, to
KPA500 with LDG AT-1000 Pro II autotuner.  I will make sure that I don't
pump full watts into LDG tuner during tuning (I will use only the IC7300 to
do the tuning) or not to present a high SWR to the amp.  As you know with
the IC7300, I use the "tune" button on the IC7300 and it limits the output
to 10 watts for the LDG tuner to go through its tuning cycles (the internal
tuner in the IC7300 is bypassed when wired to the LDG tuner).  I have tried
to get some responses in other forums but no luck.



--
Sent from: http://elecraft.365791.n2.nabble.com/