[Elecraft] KIO3B upgrade

[Joseph M. Durnal]

Hey Jim,

Replacing my external box (US Interface Navigator) with the KIO3B was
a change I was glad to make to my K3.  Audio levels are controlled two
ways, 1, in the K3 menus and 2, in the computer operating system sound
settings.  The application may also have adjustments for the audio
levels.  At first, losing my knobs made it a little more difficult to
set levels for different modes and applications, but once I got it set
just right, I found that saving the configurations made the
adjustments much more precise from and repeatable from mode to mode,
etc.  I really like the single USB cable between the PC & K3.

73 de Joe NE3R


On Tue, Jun 1, 2021 at 7:39 AM Jim Leder <k8cxm at hotmail.com> wrote:
>
> I have an older K3 and have been using a USB Signalink for digital. The audio levels are easy to control with the TX and RX pots on the Signalink. With the KIO3B installed, putting the soundcard inside the K3, how are those levels controlled? I ordered the upgrade kit, but need to know about this before finishing it up.
> The Signalink has been easy to control and very reliable. Will the KIO3B upgrade be as easy to operate?
>
> Jim Leder … K8CXM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to joseph.durnal at gmail.com