[Elecraft] Receiving with Skimmer SDR on K-3 transmit antennas

[Bob Wilson, N6TV]

I documented the procedure about 13 years ago in this presentation, linked
at the very bottom of my QRZ.COM page <https://www.qrz.com/db/n6tv>, which
includes the recommended Mini-Circuits 50 ohm splitter (ZFSC-2-6
<https://www.minicircuits.com/pdfs/ZFSC-2-6%2B.pdf>).

   - Adding a Software Defined Radio (SDR) to an SO2R station
   <http://tinyurl.com/4zama4>

High power cannot exit the RF ANT OUT jack, so it's safe, but there's no
way to prevent a local skimmer from spotting you.  Skimmer won't spot your
own call, but it will usually spot busted variants.  I recommend
disconnecting your skimmer from the RBN when operating at the same site.

Local RF will usually leak into the SDR even with no antenna connected; the
SDR is very sensitive.  Probably no way to mute it completely during TX.

73,
Bob, N6TV


On Mon, Jun 7, 2021 at 6:50 PM N4ZR <n4zr at comcast.net> wrote:

> I would like to be able to connect my SDR (an RP-16) to my transmitting
> antennas, and have it automatically muted when my K3/KPA-1500 goes to
> transmit.  The idea is to have the best possible antennas available for
> Skimming while active in contests.
>
> It seems to me that I should be able to connect a splitter between the
> RX Out and RX In ports on the K3, and use that to feed the SDR by
> pressing the RX Ant button  (at a cost of ~3.5 dB loss, of course).
> Question is, what happens when I go to transmit - is the RX Out line
> muted so that my SDR won't try to spot me? Ideally, I'd think it would
> be, but I've groped around in the K3 manual and Fred Cady's book, and
> haven't found a concrete answer - can anyone help?
>
> --
> 73, Pete N4ZR
> Check out the new Reverse Beacon Network
> web server at <http://beta.reversebeacon.net>.
> For spots, please use your favorite
> "retail" DX cluster.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6tv at arrl.net