[Elecraft] A Clarification: IC-7300 vs FTDX10

[Morgan Bailey]

You are describing a pure ADC front in radio...7300,7610 and now K4. The K4
might be better. The K3 is NOT an ADC front end and neither is the FTDX10
or the FTDX101 or the Kenwood 890. I have not had a 6600M at a FD site. But
if I did, the antennas separating them would be the max allowable distance
apart.

73, Morgan NJ8M


On Tue, Jun 8, 2021 at 7:41 PM Bert <ve3nr at bell.net> wrote:

> FD is only once a year!! ;-))
> Bert VE3NR
>
>
>
> On 2021-06-08 20:32, Jim Brown wrote:
> > On 6/8/2021 4:58 PM, Bert wrote:
> >> Do you think you can work more stations with a K3 vs a 7300
> >> everything else being equal, antennas, location, etc.?
> >
> > I have seen reports that the 7300 is a dog at FD
> >
> > 73, Jim K9YC
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ve3nr at bell.net
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mbaileycrna at gmail.com
>