[Elecraft] Front end RF overload

[David Hachadorian]

Try this:
https://marc.info/?l=elecraft&m=145323127930319&w=2

Unfortunately, the link near the bottom for the more robust replacement 
part doesn't work anymore, but maybe someone can come up with the part 
number.  I've got a bunch of them at home, but I'm on vacation.  The 
robust replacement is slightly larger in size, but it will still fit on 
the solder pads if you are careful.

Dave Hachadorian, K6LL
Big Bear Lake, CA



On 7/18/2021 9:34 PM, Connie Marshall wrote:
> While operating SO2R the 'HIGH RF" warning flashed on the K3 display. 
> Before I could react and stop the transmission on the other radio the 
> front end got zapped. The radio is down about 50 db on RX. I checked 
> Ant 2 and RX antenna and the same problem so probably not the surge 
> protectors on each of these inputs. Any ideas on what part goes out 
> when this happens. The TX radio was on 20 meters and the RX radio was 
> on 15 meters.
>
> Connie / K5CM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6ll.dave at gmail.com 

-- 
Dave Hachadorian, K6LL
Yuma, AZ