[Elecraft] Broke my K2 :(

[John Marvin]

Hopefully this is obvious, but make sure you are using the 90-91% 
isopropyl alcohol, and not the 70% variety. It can still be hard to get 
the 90% variety these days.

73,
John  - AC0ZG

On 7/14/2021 4:41 PM, Peter Eijlander (PA0PJE) wrote:
> Yes Jerry, isopropyl alcohol does this!
> I once cleaned a working print of a GPS receiver with isopropyl 
> alcohol and it stopped working. Letting it be and trying it again next 
> day turned out it worked perfectly again.
>
>  From then on I leave a PCB to rest after cleaning to have the IPA dry 
> out completely...
>
> 73,
> Peter - PA0PJE
>
>
>
>
>
> Op 14-07-2021 om 14:54 schreef jerry:
>> Actually, I suspect that when I scrubbed it with isopropyl alcohol, it
>> shorted out
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jm-ec at themarvins.org