[Elecraft] A or B?

Dan Presley n7cqr at arrl.net
Tue Jul 6 14:57:30 EDT 2021


Although a bit long check out Chuck Adams video on Iambic B and the various permutations. This may help clear up some questions. 

https://youtu.be/mFtPPyjrsVU

Dan Presley 503-701-3871
danpresley at me. com 
N7CQR at arrl.net


> On Jul 6, 2021, at 09:07, Louandzip via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> I'm a squeezer and use B.  It's physically the easiest, particularly at higher speeds, and I believe B is really most common.  Of course you don't have to squeeze using B. 
> 
> 
>  On Tue, Jul 6, 2021 at 9:11 AM, Tom Doligalski via Elecraft<elecraft at mailman.qth.net> wrote:   I’ve always preferred B, and I do use squeeze keying. 
> 
> If I were starting off I would probably recommend B. I doubt there is much difference in the learning curve between either!
> 
> Tom W4KX
> 
>> On Jul 6, 2021, at 10:58 AM, Wayne Burdick <n6kr at elecraft.com> wrote:
>> 
>> I’ve always used mode A. Mode B may be preferable for those doing squeeze-keying, especially at higher speeds. 
>> 
>> Wayne
>> N6KR
>> 
>> ----
>> elecraft.com
>> 
>>>> On Jul 6, 2021, at 7:36 AM, Gary Peterson <kzerocx at gmail.com> wrote:
>>> 
>>> An old friend, who has been inactive for several years, recently purchased a used K3.  This is the first transceiver that he’s owned that includes a built in keyer.  He has always operated CW with a straight key.  He has acquired Vibroplex paddles and wants to know whether to set the radio’s keyer for mode A or mode B iambic.  He has never used an iambic keyer or a bug, before.
>>> 
>>> I learned iambic keying with a WB4VVF circuit board, back in the early 1970s, so mode B is what I prefer.  I know there are a lot of died-in-the-wool CW people who frequent this list and I would like any opinions as to whether it is easier for a newbie to learn iambic mode A or mode B.  I have no clue.
>>> 
>>> Thanks in advance for any advice or opinions that I can pass along.
>>> 
>>> Gary
>>> KzeroCX
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to n6kr at elecraft.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w4kx at mac.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to louandzip at yahoo.com   
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7cqr at arrl.net


More information about the Elecraft mailing list