[Elecraft] FTDI driver on Win10

[Don Wilhelm]

I would advise you to download and install the latest FTDI drivers from 
the FTDI website.
My understanding is that Win 10 does no longer include the FTDI drivers.

73,
Don W3FPR

On 7/2/2021 10:03 PM, Mike Dodd wrote:
> My K3s, KPA500, and KAT500 are connected to my Win 8.1 Pro PC, and 
> everything works fine. I am about to replace the Win 8.1 box with a 
> Win 10 Pro box, and need to connect the Elecraft equipment to it.
>
> QUESTION:
> I have a PDF document, "Application Note AN_396 FTDI Drivers 
> Installation Guide for Windows 10, Version 1.0, Issue Date: 
> 2016-02-02." Are these instructions correct and current, or is there 
> later information I should read?
>
> Or is the FTDI driver already installed in Win 10 Pro, so I don't have 
> to do anything except plug in the USB dongle?
>
> Thanks for any information.
>
> 73, Mike N4CF
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to don at w3fpr.com