[Elecraft] FTDI driver on Win10

[Dave]

Hi Mike

Windows 10 should detect the cables with FTDI chipset without any additional driver installation. The KXUSB cable uses the FTDI chipset and it enumerated as a com port just fine. 

73
Dave wo2x

Sent from my waxed string and tin cans. 

> On Jul 2, 2021, at 10:05 PM, Mike Dodd <mike at mdodd.com> wrote:
> 
> My K3s, KPA500, and KAT500 are connected to my Win 8.1 Pro PC, and everything works fine. I am about to replace the Win 8.1 box with a Win 10 Pro box, and need to connect the Elecraft equipment to it.
> 
> QUESTION:
> I have a PDF document, "Application Note AN_396 FTDI Drivers Installation Guide for Windows 10, Version 1.0, Issue Date: 2016-02-02." Are these instructions correct and current, or is there later information I should read?
> 
> Or is the FTDI driver already installed in Win 10 Pro, so I don't have to do anything except plug in the USB dongle?
> 
> Thanks for any information.
> 
> 73, Mike N4CF
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rocketnj at gmail.com