[Elecraft] Temperature or Warmth of KPA500 when "Off" ?

[George Thornton]

Check electrical codes.  I don't believe a power strip for 220 is legal under the electrical code.  Too much power.

Concur that you can build an on/off switch to control the outlet.

-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Ken Winterling
Sent: Thursday, July 1, 2021 11:26 AM
To: John Nicholson <macymonkeys at charter.net>
Cc: Elecraft Reflector <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Temperature or Warmth of KPA500 when "Off" ?

John,

You could build a 220/240V outlet with a remote switch using a couple electrical boxes.

Ken
WA2LBI





On Thu, Jul 1, 2021 at 1:01 PM John Nicholson <macymonkeys at charter.net>
wrote:

> Does anyone know if there is such a thing as a 220V power strip? My 
> searches come up empty handed. I would like to plug the KPA500 into 
> the strip to turn it totally on off. The power switch on the back of 
> the amp is inconvenient to reach in my shack.
>
> John K7FD
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to gthornton at thorntonmostullaw.com