[Elecraft] MH2 mic and the K3

[Clark Macaulay]

Download the MH2 instructions from Elecraft site and you will see that the
mic has different jumper settings for the K3.  I’m not sure if an MH2
 configured for K2 will work unchanged with K3.  The K2 config in the mic
has a resistor that is not there for K3.  At least that is the way I read
it.

Bottom line: mic should work fine with either rig but not interchangeable.

On Tue, Jan 26, 2021 at 1:46 PM Jorge Diez (CX6VM-CW5W) <
cx6vm.jorge at gmail.com> wrote:

> Hello Mike
>
> Yes, it works with K3
>
> https://ftp.elecraft.com/MH2/E740030_MH2_Rev_D.pdf
>
> 73,
>
>
> Enviado desde mi iPhone
>
> > El 26 ene. 2021, a la(s) 15:14, NJMike <mikekopacki at gmail.com> escribió:
> >
> > Will the MH2 hand mic that was originally for the K2 work with the K3?
> I
> > know there is an MH4 mic now that works with both rigs.
> >
> > Thanks,
> > Mike NJ2OM
> >
> >
> >
> > --
> > Sent from: http://elecraft.365791.n2.nabble.com/
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to cx6vm.jorge at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to clark.macaulay at gmail.com

-- 
Sent from Gmail Mobile