[Elecraft] Mac vs K3s - Again

[John Stengrevics]

Hi Richard,

I’ve never downloaded a driver to use my Mac with my K3S.

73,

John
WA1EAZ

> On Jan 23, 2021, at 11:50 AM, Richard <FlatHat at comcast.net> wrote:
> 
> Working hard to wean my K3s off a SignaLink and connect it directly via a standard A/B USB cable. Results have been frustrating but encouraging. The particulars are these.
> 
> Mac mini
>   Late 2012
>   2.5 GHz Intel Core i5
>   8 GB RAM
>   Running 10.12.6 Sierra
> 
> K3s 100
> 
> I’m going to try replacing the probably out of date FTDI driver with a new driver from SciLabs. Do I need to remove the old FTDI driver before installing the new SciLabs driver?
> 
> NOTE: I have a grand old IC-706MkIIG now also running WSJT-X 2.2.2 through a SignaLink with absolutely no problems. Assuming this setup uses the old FTDI driver, dare I risk messing up that setup by changing to the new SciLabs driver? I really don’t want to do that.
> 
> Replies here are fine but please CC me at FlatHat at comcast.net
> 
> Cheers!
> 
> Richard Kunc - W4KBX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jstengrevics at comcast.net