[Elecraft] KPA 1500 fan speed at turn off

[rocketnj at gmail.com]

I use Node Red to control and monitor the KPA1500. I have written into the
flow to delay turn off of the amp when I click power off until the
temperature of the amp is down to 38 C. The fans are programmed to turn off
@ 39C.
This way I can walk away after clicking OFF and not wait for it to cool off.

Node Red is free and the amp can be controlled from any web browser.

73
Dave wo2x



-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
Behalf Of Howard Sherer
Sent: Thursday, January 21, 2021 8:19 AM
To: elecraft <elecraft at mailman.qth.net>
Subject: [Elecraft] KPA 1500 fan speed at turn off

Wouldn't it be a good idea to keep the fan turned on in the KPA-1500 after
you power it off till the internal temperature reaches its lower temp?

 Howard
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to rocketnj at gmail.com