[Elecraft] K3: CW characters sound very hard / short

[Klaus Koppendorfer]

Put KSYN3A Synthesizer Upgrade Boards into your K3 and CW Chars are  ok at QRQ high speed
Have done this mode on my K3 and got an completly another Radio also on receive

73
Oe6kyg


-----Ursprüngliche Nachricht-----
Von: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> Im Auftrag von dl2ki
Gesendet: Freitag, 22. Jänner 2021 07:23
An: elecraft at mailman.qth.net
Betreff: [Elecraft] K3: CW characters sound very hard / short

Hi,

a friend tells me that the CW characters sound very hard / short on his K3 in the standard mode "CW QRQ = OFF". This makes the characters at higher speed ~50WPM vy hardly readable by the QSO partner.

Experiments with "CW WGHT" do not lead to success.

At higher speeds, my friend therefore switches to the mode "CW QRQ = On", where the effect does not occur. However, some functions (RIT, SPLIT) are unfortunately not available there. Therefore, this is not an ideal solution.

So far I have not found any clues to help him solve the problem.

Are there other setting possibilities to solve this issue, or can there also be a hardware problem here?

73, Wolfgang
DL2KI




--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to kk at ccf.net