[Elecraft] K3: CW characters sound very hard / short

[Dave Hachadorian]

What does he have for config/TX DLY?  Try resetting it to default 008.  High 
values of TX DLY cause light CW weight.

Dave Hachadorian, K6LL
Yuma, AZ

-----Original Message----- 
From: dl2ki
Sent: Thursday, January 21, 2021 11:22 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3: CW characters sound very hard / short

Hi,

a friend tells me that the CW characters sound very hard / short on his K3
in the standard mode "CW QRQ = OFF". This makes the characters at higher
speed ~50WPM vy hardly readable by the QSO partner.

Experiments with "CW WGHT" do not lead to success.

At higher speeds, my friend therefore switches to the mode "CW QRQ = On",
where the effect does not occur. However, some functions (RIT, SPLIT) are
unfortunately not available there. Therefore, this is not an ideal solution.

So far I have not found any clues to help him solve the problem.

Are there other setting possibilities to solve this issue, or can there also
be a hardware problem here?

73, Wolfgang
DL2KI




--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6ll.dave at gmail.com