[Elecraft] K4 Receive Filter question

[Grant Youngman]

This refers to the RF bandpass filters in the receiver front end.

Geant NQ5T


> On Jan 19, 2021, at 12:43 AM, RVZ via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> I believe there are no crystal Roofing Filters in the standard K4 model.  Yet the manual talks about "one set of receive filters".  Please advise the type and bandwidth of these filters?  (DSP?)
> 
> From the K4 Manual:  There are three models: the basic K4, with one set of receive filters and one analog-to-digital converter (ADC); the K4D, with a second set of receive filters and a second ADC; and the K4HD, which adds a superheterodyne front end that can be enabled as needed to provide even greater dynamic range. The superhet module uses high-performance, narrow-band crystal filters such as those used in the Elecraft K3S.  Thanks & 73, Dick- K9OM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ghyoungman at gmail.com