[Elecraft] K2 speaker dont mute

[dl7le]

Hello don,Thank you for your answer.Yes sn is un der 3000. I cant read the whole number. The first number 0 i cant identifie it.My ham friend has looked at your answer and found a mod at an elecraft site.Thank you don.73. DL7LE
-------- Ursprüngliche Nachricht --------Von: Don Wilhelm <donwilh at embarqmail.com> Datum: 11.01.21  18:44  (GMT+01:00) An: dl7le <dl7le at darc.de>, Elecraft at mailman.qth.net Betreff: Re: [Elecraft] K2 speaker dont mute I suspect that K2 SN is below 3000.  If so, add the Alternate AF Gain Wiring mod.  While you are doing that, I recommend that you replace the AF Gain control.The easiest way to change the control is to cut the pins close to the body, then alternately heat the two mounting tabs while rocking the pot to remove the control.  Remove the pins one at a time, clean up with solder wick and if solder remains in the holes, push it out with a wooden toothpick.73,Don W3FPROn 1/11/2021 11:54 AM, dl7le wrote:> Hello Yls and Oms.I have a problem with my K2. When turning the AF Audio knob counterclockwise the speaker is not quiet. Has anybody an idea how to fix this problem ?Kind regards from germany73Sebo DL7LEVon meinem/meiner Galaxy gesendet