[Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, and KPA1500

[Keith Ennis]

Sorry, you can only have 1 working at a time.  You can use a rs232 a/b switch to switch between the 2.

Keith, KV5J

Keith






On Sunday, January 3, 2021, 11:33:42 AM CST, Jim Rhodes <jimk0xu at gmail.com> wrote: 





The question I have is, can I connect the Y-connector to the back of my KPA500 and connect both my computer and the digital display with them both working?

On Sun, Jan 3, 2021, 09:07 Keith Ennis via Elecraft <elecraft at mailman.qth.net> wrote:
> KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, and KPA1500
> 
> Digital Display Unit for Elecraft's W2 Watt Meter:
> 
> With digital read out the Display Unit takes the guess work out of the LED light bar.
> 
> 
> Digital Display Unit for Elecraft's KXPA100 amplifier:
> 
> Don't wait for a fault light to come on.  Keep an eye on 5 crucial readings at all times.
> 1. Power amplifier's heat sink temperature
> 2. Power amplifier's high voltage supply voltage
> 3. Power amplifier's current
> 4. Power amplifier's output power
> 5. SWR that the KXPA100 sees at its output
> 
> 
> Digital Display Unit for Elecraft's KPA500 amplifier:
> 
> Instead of seeing only 1 crucial reading, monitor all 7 at the same time.
> 1. Power amplifier's heat sink temperature
> 2. Power amplifier's high voltage supply voltage
> 3. Power amplifier's current
> 4. Power amplifier's output power
> 5. SWR that the KPA500 sees at its output
> 6. Displays Operate/Standby mode
> 7. Displays Band amp is tuned to
> 
> 
> Digital Display Unit for Elecraft's KPA1500 amplifier:
> 
> Displays the same display that is on the KPA1500 Amplifier 
> Change the display on the KPA1500 and the display changes to show this same screen
> 
> 
> All of the Digital Display Units:
> 
> Display Unit can be located at a more visible location
> Up to the RS232 limit from unit
> 
> Easy to read 2 line display
> No USB or serial cable to computer
> No com port in Windows to manage
> No computer needed
> Plug and Play
> Simply connect the SUPPLIED dc power cable (with inline on/off switch) from the DDU to power supply and SUPPLIED  SERIAL data jumper cable to the device
> Retains all functions of the front panel
> All displayed info obtained directly from the device
> 
> Only 4" x 4" x 2"
> 
> 
> For more information and ordering go to:   http://www.kv5j.com/store
> 
> Reviews:
> https://www.eham.net/reviews/view-product?id=14701
> 
> https://www.eham.net/reviews/view-product?id=14820
> 
> 
> 
> 
> Keith, KV5J
> http://www.kv5j.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>