[Elecraft] [K3] FT4/8 Transmit Problem

[Bill Coleman]

I had a similar problem like this when using a SoundBlaster X G1 sound device. I solved it by only transmitting on one channel. If I use BOTH channels on output, it would do this weirdness. 

Don’t know if that helps you or not.

> On Jan 4, 2021, at 9:58 AM, john <reillyjf at comcast.net> wrote:
> 
> Had a transmit problem with both FT4 and FT8 this weekend during the RTTY RU contest. The data would transmit for a couple seconds (heard it in the monitor, and saw output power), then the data stops. The K3 stays in transmit (Red TX light) for the whole TX period, so I think the PTT configuration is working. I was using it in conjunction with N1MM, but closed N1MM and used WSJTx standalone, and had the same problem. Appreciate any ideas.
>   - 73, John, N0TA
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to aa4lr at arrl.net

Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr at arrl.net
Web: http://boringhamradiopart.blogspot.com
Quote: "Not within a thousand years will man ever fly!"
            -- Wilbur Wright, 1901