[Elecraft] Yaesu FT DX10

[Igor Sokolov]

Jim,

You are correct. Some of my neighbors had been giving me a lot of 
headaches with their YASU rigs in the past. Hopefully this new one is 
going to be a lot cleaner. Just look at its LO noise figures which are 
in 150+ dBc/Hz region.

Regarding clicks on CW you are right again. According to the FTDX10 
manual operator can choose CW rise time between 1,2,4 and 8 ms. And we 
know would it sound like with 1 ms setting.

73, Igor UA9CDC

07.01.2021 0:06, Jim Brown пишет:
> On 1/6/2021 4:01 AM, Igor Sokolov wrote:
>> I also consider FTDX10 as addition to my K3 and KX3
>
> Yaesu rigs produced over the last several years have been very dirty 
> (splatter) on SSB, and their rigs have a decades-long reputation for 
> being dirty on CW (clicks and phase noise).
>
> 73, Jim K9YC
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ua9cdc at gmail.com