[Elecraft] KX2 and WKmini

[Bill Lederer]

So is it  true that the WKmini doesn't remember anything upon disconnecting?

w8lvn

On Sat, Feb 27, 2021 at 8:01 PM Julia Tuttle <julia at juliatuttle.net> wrote:

> I don't think so -- you'd need an adapter that just doesn't connect that
> pin.
>
> On Sat, Feb 27, 2021, 20:19 Bill Lederer <w8lvn.9 at gmail.com> wrote:
>
>> Folks:
>>
>> I recently bought a WKmini to use for portable operation. In reading the
>> documentation, it turns out that the cable supplied that goes from the OUT
>> port of the WKmini to the key jack on the KX2 keys the tip with the code,
>> but use the ring to do a PTT function. I'm fine with QSL on the KX2, so I
>> don't need this. And in fact, the KX2 will key when either the ti or ring
>> is  engaged by the WKmini.
>>
>> Experimenting with the MacWinKeyer.app, there is a selection to turn off
>> the PTT function, and that works nicely.  I had hoped that exting the
>> program would leave that setting in the "no PTT" mode, but it is not to
>> be.
>>
>> So is there a  way that the KX2 can be convinced to only pay attention to
>> the tip when the mode is set to "Hand" and not the ring?
>>
>> Thanks,
>> w8lvn
>>
>> --
>> --w8lvn--
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to julia at juliatuttle.net
>>
>

-- 
--w8lvn--