[Elecraft] FSK on K3 using Winkey 3.0

[Joe DeVincentis]

I meant to say "I tied PTT1 and PTT2 from the WKUSB together and fed..."

Joe, KO8V

> On Feb 25, 2021, at 19:09, Joe DeVincentis <jd at ko8v.net> wrote:
> 
> As I said, I have the WKUSB.
> 
> I tied PTT1 and PTT2 from the WKUSB and fed that to the PTT on Pin 4.
> 
> I used KEY1 for CW, KEY2 for FSK - that went to Pin1 and then Pin 5 for the grounds from KEY1, PTT1 and PTT2.
> 
> IIRC, I set that scheme because FLDIGI expects KEY2 for RTTY.
> 
> I also had to change the default configuration via the demo program so the keyer comes up in RTTY mode rather than CW.  Either N1MM or FLDIGI had an issue that it was not correctly setting the mode in the keyer when it started up.  I think the S/W has since been corrected.  I did report it.  It's just been too long for me to remember exactly which software had the problem.
> 
> BTW, I used one of these for the connection to the ACC port.  It makes it so much easier not having to solder tiny pins:
> 
> https://smile.amazon.com/gp/product/B0876JTYQ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
> 
> Joe,  KO8V
> 
>> On Feb 25, 2021, at 18:12, Leroy Buller <lee.buller at gmail.com> wrote:
>> 
>> Well, I meant 3.1.  The newest version.  Could you explain the connections you used?  Pin 1 for fsk. Pin 4 for ptt.  Pin 5 for ground.  Another components?
>> 
>> Lee
>> 
>> 
> 
> ______________________________________________________________