[Elecraft] [XV] Coax Daisychain on XV Transverters

[David Ferrington, M0XDF]

Thanks Dave, certainly does help

-73 de M0XDF

> On 25 Feb 2021, at 22:02, Dave Fugleberg <dave.w0zf at gmail.com> wrote:
> 
> 
> I have 3 of them stacked on a shelf above my K3. From the K3 to the first transverter the cables are around 50cm or so... I think I used RG-8x.  The IF cables daisy chained from one XV to the next are about 15cm in length and are RG-174. I originally used RG-8X there too, but they had to be much longer than necessary in order to have a reasonable bend radius.
> Has been working well for years. Hope that helps.
> 
>> On Thu, Feb 25, 2021 at 12:22 PM David Ferrington, M0XDF <M0XDF at alphadene.co.uk> wrote:
>> For those of your with multiple XV series Transverters…
>> When you daisy chain the RF between them, have you found the length of that cable is significant or is keeping it short, say 20cm ok?
>> 73 de David, M0XDF (K3 #174, P3 #108)
>> -- 
>> When work is a pleasure, life is a joy! When work is a duty, life is
>> slavery. -Maxim Gorky, author (1868-1936)
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to dave.w0zf at gmail.com