[Elecraft] KXPA100 Fault on ANT1

[gerald.eberle]

@ N7WA

Hi Dink

Many thanks for your help. It turned out to be the same issue as you experienced. After removing the ANT1 SO239 connection from the ATU board I’ve measured also a shorted cable. To be sure that there are no other issues, I connected the ANT2 SO239 to ANT1 on the ATU board and voila, ANT1 it is working! So, I only have to get a replacement cable to have both Antenna sockets back again in working order.

73, Gerald HB9CEY