[Elecraft] P3 span changing

[w4sc]

I have observed very similar occurrences.  For example changing bands, if the center frequency  was previously tuned to 10.000.00 MHz with a span of 20KHz, then changing to another band, say 20M or 40M, then back to 30M (10MHz), the center frequency will briefly appear in the upper left corner of the P3 display, as well as in the center of the display.  It then corrects, with the proper  LH-CENTER-RH ( 9.990.00 – 10.000.00 – 10.010.00 ) displayed.  Occasionally the display will show   ( 10.000.00 – 10.000.00 – 10.010.00 ) and not correct the display. Also the FILTER BAND PASS will appear on the left side of the display, remaining there.   All of the communication to the P3 in this case is from the K3S.  I have no computer or other device connected to the K3S/P3.  Initiating a “CENTER” command via the P3 “BUTTON” will usually correct the issue……

Ben W4SC

Sent from Mail for Windows 10