[Elecraft] Kx3 and KXPA100 without PX3 while using a computer pan adapter

[Don Wilhelm]

John,

You plug in both the ACC1 and ACC2 cables from the KXPA100 (in the 
KXPACBL) - the PC connects to the KXPA100.

73,
Don W3FPR

On 2/4/2021 1:32 PM, John Evans wrote:
> Greetings all,
> 
>    I’ve been using HDSDR with Omin-Rig with a  Xiegu G90 and was able to get
> the panadapter setup working with my KX3 by itself.  Now I want to add my
> KXPA100 into the setup and am wondering how the cabling should be
> configured.
> 
>    I have my computer connected from the KX3 ACC1 port through the KXUSB
> cable to my computer.  I also have the KX3 RX I/Q port connected through a
> USB sound card to my computer.  All seems to be well in this configuration.
> 
>    Looking at the KX3 manual and Cady’s The Elecraft KX-Line book, it seems
> that I would connect the amp through the KXPACBL control cable.  This
> hookup looks like I need to connect both the ACC1 and ACC2 end of the
> control cable to those ports on the KX3.  Do I just let the ACC1 end of the
> control cable dangle?  Is anyone else running a similar setup that can
> provide some insight?
>