[Elecraft] K3 does not change mode properly with band change

[David F. Reed]

Carl, yes I do; KPA1500, pc, etc.  will try it some...

Thanks & 73

Sent from my iPhone

> On Feb 3, 2021, at 08:53, AB1DD <AB1DD at comcast.net> wrote:
> 
> Dave,
> 
> Do you have anything plugged into the K3, like the RS232 connection on the back? Any software running? Try the radio with out anything that might take control and see what happens.
> 
> 73,
> Carl
> AB1DD
> 
> Resistance is futile.
> (don't know about reactance, though)
> 
>> On 2/3/2021 8:59 AM, David F. Reed wrote:
>> Being an intermittent problem, it is hard for me to figure out but I am hoping some of you have seen and solved this...
>> 
>> Let's say I am on 40, LSB; sometimes when I change bands to 20M, it stays in LSB; sometimes it correctly changes to USB.
>> 
>> Any ideas what is going on or how to fix it?
>> 
>> Thanks & 73 de Dave, W5SV
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ab1dd at outlook.com 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w5sv.dave at gmail.com