[Elecraft] KX3, KXPA100 setup with Win4K3 Suite question

[John Evans]

Hi Don,

   Thanks for the recommendations and comments.  Both the KXPA utility 
and the KX3 utility communicate fine with my hardware setup.  I'm 
guessing the WIn4K3 Suite does not properly communicate with both 
devices through one com port.  I'll see if I can post on their groups.io 
forum and see what they may have to say.

Thanks es 73 - john - n0hj

On 12/27/2021 12:09 PM, Don Wilhelm wrote:
> John,
>
> Only one KXUSB is needed.  The other is just a TRS to TRS cable.
> The KXUSB cable must connect first between the KXPA100 and the PC.  
> The second cable between the KXPA100 and the KX3.
> If connected that way, everything should work.
> See if both the KXPA100 Utility and the KX3 Utility will connect 
> properly.
> I don't know what Win4K3 suite does in its routing.
>
> 73,
> Don W3FPR
>