[Elecraft] K4 Remote Software?

[Gerry Hull]

Works great, Fred, if you have very low latency to W7RN.  Sending winkey
over the wire and generating the CW @ the station
has always been flawless for me...  but that works for you, and that's
awesome.  There is no one solution: it's always a systems
problem.

73,

Gerry Hull, *W1VE  *Hancock, NH USA
CWOps #191 | YCCC | CanAm Contest Coalition | Maritime Contest Club
RadioSport Manitoba | ARRL | RAC | QCWA
ARCluster dxc.w1ve.com | Telnet or telnet:7373 access | RBN direct feeds



On Wed, Dec 22, 2021 at 9:54 PM Fred Jensen <k6dgwnv at gmail.com> wrote:

> As a proponent of the "Regardless of the MTBF of each part, put enough
> on the rocket and something will always be broken," I opt for fewer is
> better, especially if software/firmware is involved.  I key W7RN
> remotely from my local Winkey on Pin 4 of the I/O connector on the back
> of the RRC-1258.  It is the direct key line to the remote radio,
> bypassing emulations of keyers, control of remote interfaces/remote
> Winkeys, and the like.  My keying, monitored off the air on my P3 and K2
> at home looks and sounds perfect ... all the time. Well other than
> operator-caused errors.
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> Gerry Hull wrote on 12/22/2021 4:44 PM:
> > As of today, the combo of the K3s + Mirobit RRC boxes rocks the remote
> > world.  That's not just my humble opinion, its a proven fact via results.
> > In fact, many bypass the audio built into other systems and use RRC boxes
> > to mitigate these issues.
> >
>
>
>
> --
> This email has been checked for viruses by AVG.
> https://www.avg.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gerry at w1ve.com