[Elecraft] FOR SALE: Elecraft K3/100 160-6m Transceiver — KAT3 ATU—KPA100 Amplifier—XRX3 Subreceiver

[Charles Tropp]

The K3 has been sold. Thanks for your interest.

On Mon, Dec 20, 2021 at 6:05 AM Charles Tropp <charlestropp at gmail.com>
wrote:

> Elecraft K3/100 160-6m Transceiver Serial #2502 with the standard 2.7 kHz
> filter, the KAT3 Internal Auto Antenna Tuner, KPA100W Amplifier and XRX3
> Subreceiver.  The subreceiver is identical to the main receiver and has its
> own 400Hz filter. It can tune the same range of frequencies as the main
> receiver and is terrific at busting DX pileups.
>
>    - This K3 also comes with lots of extras including:
>    - Three (3) additional CW Filters: 700Hz, 400Hz and 250Hz for the
>    utmost in selectivity.
>    - KXV3A Interface Option which provides a separate receive antenna
>    input and output, an input and output for use with an external transverter,
>    and a buffered i.f. output. (Handy for adding an external Panadapter or
>    SDR).
>    - The K3 has been upgraded with the KSYN3A synthesizers in both the
>    Main and Subreceiver. The synthesizer produces cleaner synthesized signals
>    leading to better transmitter and receiver performance and has a better
>    switch time to improve TX/RX switching for high speed CW.
>    - There is no internal sound card in this K3, but included in this
>    bundle is the TigerTronics Signal Link USB interface which adds an external
>    sound card and comes with the Elecraft connection cable and complete
>    documentation. Just what you need to work the new digital modes such as FT8.
>    - You can connect a PC that has a serial port to download firmware and
>    software upgrades as well as to allow computer control of the K3 with your
>    favorite contest and general loggers. No serial port? No problem—I include
>    the original Elecraft KUSB Universal Serial Bus Adapter cable which allows
>    you to simply plug the K3 into an available USB port.
>    - This K3 was upgraded, calibrated and aligned by the Elecraft Factory
>    in 2015 to meet or exceed all factory specifications.
>    - The installation and operation manuals are included as well as all
>    upgrade and repair documentation.
>    - This unit is sold *AS IS *and subject to the following *caveat* which
>    may or may not be of concern to you: I am unable to get my Begali Single
>    Lever Paddle to work properly with the Elecraft Internal Keyer. I can only
>    send dits or dahs (depending on the menu option) but not both. In other
>    words one side of the paddle does not work. There may be a problem with the
>    paddle jack connection. I have always preferred to use either a straight
>    key or my external Winkeyer USB as it performs well with the software
>    programs that I use and it plugs directly into the Key Jack which works
>    fine.
>
>
> I am asking $1,695 for this package + Shipping via Priority US Mail to
> CONUS.
>
>
> --
> *73, Charles N2SO*
>
>


-- 
*73, Charles N2SO*