[Elecraft] TX EQ issue

[w4sc]

Hi Wayne,

After searching I found info in the programmers manual that helped me understand how it works.  It is a little hard to follow using the K3 / K3S owners manual, and / or Cady’s book.

I have written a couple of macros, not yet checked out, that may work(?).  


Turn ESSB ON, SET TX EQ:
	ES1;TE-03+00+00+00+00+00+03+03;	Mode must be SSB to turn ESSB ON, SET TX EQ Bins, 
						Sets EQ for ESSB (USB, LSB), AM, and FM
						A “+” sign will appear in lower RH corner of display
Turn ESSB OFF, SET TX EQ:
	ES0;TE-03+00+00+00+00+00-03-06;	Turn ESSB OFF, SET TX EQ Bins for current mode Two 
       Separate TX EQ, 1,(USB, LSB) or 2,(AM FM)

Also I was able to effect the settings via the Main/Config menus…. Setting ESSB ON a single TX EQ is used for all voice modes.  Setting ESSB OFF, the two TX EQ settings will be be available as described in the macro notes.  I haven’t verified this with testing yet as to the actual effect…

Also, not sure about the CW/DATA Modes….. I don’t see a macro command for that, but it is stated that CW/DATA TX-EQ is set “0”.

73 de Ben W4SC



Sent from Mail for Windows

From: Wayne Burdick
Sent: Saturday, December 18, 2021 19:56
To: w4sc
Cc: Elecraft Reflector
Subject: Re: [Elecraft] TX EQ issue

Hi Ben,

Separate TX EQ for different voice modes has not yet been implemented. I'll make sure it's on the list.

73,
Wayne
N6KR


> On Dec 18, 2021, at 8:59 AM, w4sc <w4sc at windstream.net> wrote:
> 
> Having trouble setting TX-EQ for FM and SSB.  Changing TX EQ when setting TX EQ in FM mode,  the TX EQ setting for SSB changes to what was set when in the FM mode.  This feature appears to not be working.
> 
> Manual says two separate EQ settins are available ,, one for SSB, a second for AM/FM modes.
> 
> Filter TX set-up.
> 
> FL1  - 13KHz -- set for FM TX
> FL2  - 6KHz  set for AM TX
> FL3 – 2.8KHz – set for SSB / CW-DATA  TX
> 
> Has anyone else observed this issue?
> 
> Solution?
> 
> TIA  de Ben W4SC
> 
> Sent from Mail for Windows
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com