[Elecraft] K2 and N1MM+
Jos Weitenberg
pa3hgx at gmail.com
Wed Dec 8 06:38:44 EST 2021
Hi Ted,
For keying my K2 I use a special CW-usb cable and that works fine in N1MM
You can find this cable on Alieexpress or Ebay
73 Jos Pa3hgx
https://www.aliexpress.com/item/1005003191002335.html?spm=a2g0o.productlist.0.0.53273477baWUna&algo_pvid=f9d38970-0a0f-47d4-8aee-8a1b992bf842&algo_exp_id=f9d38970-0a0f-47d4-8aee-8a1b992bf842-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000024583047966%22%7D
Verstuurd vanaf mijn iPad
> Op 7 dec. 2021 om 22:14 heeft edauer at aya.yale.edu het volgende geschreven:
>
> I need advice for getting N1MM+ to play well with a K2. I have tried it
> with two different K2 rigs: a K2 with a KIO2, and a different K2-100 with
> the built in IO. Same problem. The K2 Port parameter is set to ON and N1MM
> tracks the RX frequency, so I know the rig and the computer are
> communicating. But a keyboard command from N1MM to the rig returns the
> error message -- "Unable to send this CW because there is no CW Port set in
> Config."
>
> But the CW box in the N1MM configuration screen IS checked, and "set," and
> config is: 4800 N 8 1 DTR and RTS Always On (and every other possible
> combination thereof); Radio on Nr 1, and PTT via radio command mode CW. I
> have also tried every possible permutation of KIO2 and KUSB cables, on both
> rigs, in case of a badness there. No change. Same problem every time.
>
> I know that when using my K3 with N1MM it's necessary to have the K3's menu
> settings for DTR and RTS set properly to CW to match the settings in N1MM .
> . . but I have found no such option in the K2 menus. I have also read that
> it can be done using a W1EL keyer, but having outboard dongles sort of
> defeats my purpose.
>
> Can it be done with just the K2/KIO2, a KUSB cable, and an ordinary
> computer?
>
> Thanks, anyone.
>
> Ted, KN1CBR
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pa3hgx at gmail.com
More information about the Elecraft
mailing list