[Elecraft] K3 Auto ATU Problem

[Drew AF2Z]

You can set TUN PWR in the K3 Config Menu to something other than 5 watts.

73,
Drew
AF2Z


On 12/07/21 06:59, Tom Boucher wrote:
> Thanks NK7Z, NK7I and K8CN for responses.
> 
> Dave and Rick indicated that running the K3 at a higher power level during
> the ATU Tune sequence might solve the problem however, as far as I can see,
> the power level is fixed at 5 watts during auto tune and cannot be altered.
> 
> Mike, there is no problem with the Ant 1 and Ant 2 ports and manual
> selection of L & C works OK. The ATU just won't end up with the right
> settings for lowest SWR. The problem has not always existed.
> 
> 73,
> Tom G3OLB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pubx1 at af2z.net
>