[Elecraft] Rx-In/Out used for exteranl SDR Device?
Pete Smith N4ZR
pete.n4zr at gmail.com
Sun Dec 5 16:03:07 EST 2021
I'm afraid you're right, Dave. I had the RX output into terminal 1 and
the line back in on terminal 2, because I figured the "common" terminal
should be the one going to the SDR. Great to get this straight, finally.
73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at <http://beta.reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.
On 12/5/2021 3:21 PM, David Hachadorian wrote:
> Are you hooking up the splitter correctly? RX ANT OUT from the radio
> goes to the common terminal of the splitter, and one of the two
> independent splitter outputs goes to RX ANT IN on the radio. The
> other independent splitter output goes to the SDR. Sorry to bring up
> such a simple possibility, but sometimes it's the simple stuff that
> trips us up.
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
>
> On 12/5/2021 12:52 PM, Pete Smith N4ZR wrote:
>> I don't know why I didn't think of that. Just tried it, and there is
>> no difference in S-meter reading , so it may/must be a splitter
>> problem. I tried it with another spltter, with and and without the
>> SDR, and, again, large drop. WTF???
>>
>> 73, Pete N4ZR
>> Check out the new Reverse Beacon Network
>> web server at<http://beta.reversebeacon.net>.
>> For spots, please use your favorite
>> "retail" DX cluster.
>>
>> On 12/5/2021 12:35 PM, Dave wrote:
>>>> I see about a 3 S-unit drop in signal
>>>> level when routing through the splitter
>>> Pete (N4ZR), what do you see with a straight cable linking in/out?
>>>
>>> I have no idea about Minicircuits splitters, but my home made one had a
>>> measured 3.1 dB loss at 29.7 MHz.
>>>
>>> 73 Dave G4AON
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k6ll.dave at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pete.n4zr at gmail.com
More information about the Elecraft
mailing list