[Elecraft] New KX3/WSJT-X puzzle

[David Haines]

Using CAT on the PC.

TEST CAT on PC turns green.
TEST PTT on PC turns red and turns on the KX3  TX LED.  It looks like if 
I change to VOX the problem goes away, but I've always used CAT in the past.

Signalinnk PTT LED turns on with TX.

david
KC1DNY

On 12/3/2021 1:44 PM, Julia Tuttle wrote:
> Are you using CAT on the PC, VOX on the SignaLink, or VOX on the KX3 
> for PTT?
>
> On Fri, Dec 3, 2021, 13:23 David Haines <dhaines at bates.edu> wrote:
>
>     I'll send this to the group before I start taking things apart:
>
>     Running KX3 with KXP100 using SignaLink on 40m.  I've been using FT8
>     successfully for over a year.  Then last night something new:
>
>     When I transmit (either the TUNE button of WSJT--X or replying to
>     a CQ)
>     the signal goes out successfully.  When the TX ends, the red LED
>     on the
>     SignaLink goes out but the TX red LED on the KX3 stays on.
>
>     And --  this is the weird part -- the RX signal is gone -- absolutely
>     nothing on the waterfall or from the speaker.
>
>     This does not happen when I push the TUNE button on the KX3.
>
>     Ideas?
>
>     david
>     KC1DNY
>     Butler Hill Farm in the woods of Maine
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net
>
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>     Message delivered to julia at juliatuttle.net 
>