[Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500

[Lou Mecseri]

I got one for my KAT500 and KAP500 and they are fantastic.

I have no connection whatsoever with Keith.

73, Lou KE1F


On 8/30/2021 20:19, Keith Ennis via Elecraft wrote:
> KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500
> -
> Digital Display Unit for Elecraft's W2 Watt Meter:
> The digital read out on the Display Unit takes the guess work out of the LED light bars.
>
> -
> Digital Display Unit for Elecraft's KXPA100 amplifier:
> -
> Don't wait for a fault light to come on.  Keep an eye on 5 crucial readings at all times.
>
> 1. Power amplifier's heat sink temperature
> 2. Power amplifier's high voltage supply voltage
> 3. Power amplifier's current
> 4. Power amplifier's output power
> 5. SWR that the KXPA100 sees at its output
> -
> -
> Digital Display Unit for Elecraft's KPA500 amplifier:
> -
> Instead of seeing only 1 crucial reading, monitor all 7 at the same time.
> -
> 1. Power amplifier's heat sink temperature
> 2. Power amplifier's high voltage supply voltage
> 3. Power amplifier's current
> 4. Power amplifier's output power
> 5. SWR that the KPA500 sees at its output
> 6. Displays Operate/Standby mode
> 7. Displays Band amp is tuned to
> -
> Digital Display Unit for KAT500:
> -
> This unit displays the front panel settings.
> If the tuner is in bypass or not.
> Displays the capacitance and inductance used.
> What type of circuit is used. LC or CL.
> SWR of both before and after a tune cycle is completed.
> -
> -
> Digital Display Unit for Elecraft's KPA1500 amplifier:
>
> Displays the same display that is on the KPA1500 Amplifier
> Change the display on the KPA1500 and the display changes to show this same screen
> -
> -
> All of the Digital Display Units:
> -
> Display Unit can be located at a more visible location
> Up to the RS232 limit from unit
> -
> Easy to read 2 line display
> No USB or serial cable to computer
> No com port in Windows to manage
> No computer needed
> Plug and Play
> Simply connect the SUPPLIED dc power cable (with inline on/off switch) from the DDU to power supply and SUPPLIED  SERIAL data jumper cable to the device
> Retains all functions of the front panel
> All displayed info obtained directly from the device
> -
> Only 4" x 4" x 2"
> -
> For more information and ordering go to:   http://www.kv5j.com/store
>
> Reviews:
> https://www.eham.net/reviews/view-product?id=14701
> -
> https://www.eham.net/reviews/view-product?id=14820
> -
>
> Keith, KV5J
>
>
>
> http://www.kv5j.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lmecseri at cfl.rr.com