[Elecraft] Help Needed for KPA100 Amplifier

[Don Wilhelm]

Carter,

Check/replug and check again the RJ45 plug on the back of the KXPA100.  
It must be locked in place.  You should hear a light click as it is 
fully seated in its socket.

73,
Don W3FPR

On 8/12/2021 12:42 PM, Carter Craigie wrote:
>   My problems all started when I moved my Elecraft KX3, PX3, and the ASTRON
> RS-35A PS from the garage upstairs to the second floor. At first I noticed
> that my Amp would put out only about 70-80 Watts. Then the output went
> lower and lower until the Amp would not turn on. See below.
>
>