[Elecraft] Need help.

[Jim Sheldon]

Mike,
I haven't seen anyone mention this before, so make sure you haven't hit 
the "ANT" button and moved the selected antenna to the open PL-259.  
Probaly should show ANT1 on the display. If it shows ANT2, hit the ANT 
button on the front panel and re-select the right antenna.

Jim, W0EB

------ Original Message ------
From: "Mike Harris via Elecraft" <elecraft at mailman.qth.net>
To: elecraft at mailman.qth.net
Sent: 8/8/2021 8:02:25 AM
Subject: Re: [Elecraft] Need help.

Hi Rick,

Have you tried reloading a saved working configuration? Does the red TX led illuminate? If you press the TUNE button is there any output and what does the SWR indicate.

Regards,

Mike VP8NO



On 07/08/2021 23:16, Richard Isaacs via Elecraft wrote:
>I recently purchased a K3 and Panadapter.
>
>No issues since June. Last night after using the radio, covered and went to bed. This morning…it’s like the antenna is not attached. No receive and when keying the mike…no transmit. All other radios work off my Butternut antenna.  Went into utilities and reloaded 5.67…still nothing.
>
>Please help and thanks in advance.
>
>Rick
>W3RKI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w0eb at cox.net