[Elecraft] Plug on KPA-1500

[Mike Dodd]

On 8/5/2021 1:18 PM, Mike Dodd wrote:
> So if you want to run a KPA1500 from 120V, tell the electrician the
> current draw at 120V, and ask him about running a 30A 120V circuit to a
> 30A receptacle.

Oops! I just looked at the KPA1500 specifications and found this for 
Supply Voltage and Current: 200 to 250 VAC, 50/60 Hz up to 20A.

There is no mention of 120V, so your electrician will need to run a 240V 
circuit (probably 25A or 30A) to a correctly sized 240V receptacle. 
You'll need to cut off the 120V plug and install a mating 240V plug on 
that power cable.

--- Mike N4CF