[Elecraft] K4 interface to KPA-1500

[Bob Wilson, N6TV]

Yes, identical AUX cable (and/or Y-BOX) works fine.

TX Sample is not yet implemented (could be a while).  I recommend leaving
that connector unused until further notice.

73,
Bob, N6TV
https://bit.ly/Y-BOX

On Thu, Apr 29, 2021, 9:16 PM James F. Boehner, MD via Elecraft <
elecraft at mailman.qth.net> wrote:

> Is there information anywhere on how to interface the K4 to a KPA-1500 with
> the use of a KPAK3AUX cable?  Is it straightforward as with the K3?
>
>
>
> Is there a direct connection between the Tx sample connectors on the two
> units?  Is there a setting in the K4 that must be made to use the Tx
> sample?
>
>
>
> Thanks!
>
>
>
> '73 de JIM N2ZZ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6tv at arrl.net
>