[Elecraft] [K3] RTTY Questions

[John Reilly]

I have two K3 questions:
    1. In Data MD, AFSk A, you can set the baud rate to either 45 or 75. 
Is the baud rate just for the RTTY reader? Does it affect anything else?
    2. With my K3s power set to 100w, RTTY starts at a little below 50w 
and and then fairly slowly builds to 100w (measured on an external 
wattmeter). I've done a TX calibration -- no change. What is going on?

Thanks,
   - 73, John, N0TA