[Elecraft] K3 RIT not working
hdv at kpnplanet.nl
hdv at kpnplanet.nl
Sat Apr 24 04:48:20 EDT 2021
Hi Chris,
Check if R78 and R79 are still OK.
If the encoder does not get voltage(s) via these resistors if will never
work.
73 Henk
PA0C
-----Oorspronkelijk bericht-----
Van: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net>
Namens Christian Janssen DL1MGB
Verzonden: zaterdag 24 april 2021 09:53
Aan: elecraft at mailman.qth.net
Onderwerp: Re: [Elecraft] K3 RIT not working
Am 24.04.2021 um 09:52 schrieb Christian Janssen DL1MGB:
> Hi Gernit,
>
> maybe I was a bit unclear. The RIT didn't work before I changed the
encoder. And it still doesn't work after I replaced the encoder by a brand
new one directly shipped from Elecraft.
>
> 73s Chris DL1MGB
>
>
>
> Am 24.04.2021 um 09:39 schrieb G:
>> Hi Chris
>> I had the same issue with the filter shift pot. I mailed elecraft support
and they sent me a replacement part. Takes some effort to replace it but it
is doable.
>> 73 Gernit DF5RF
>>
>> --
>> Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail
gesendet.
>> Am 24.04.21, 07:38 schrieb Christian Janssen DL1MGB <chris at dl1mgb.com>:
>>
>> Hello,
>>
>> after doing some refurbishing (changing rotten connectors,
cleaning,...) I was curious if changing the RIT encoder will make the RIT
work again. But it doesn't.
>>
>> K3 #1532
>> Firmware 5.67
>>
>> I can press on the RIT and XIT button and it shows RIT and XIT in the
display, the green LED below the CLR goes on. But when I turn the RIT knob,
it stays at 0.00 and the frequency also doesn't change (also audibly). Also
when both RIT and XIT are OFF and CONFIG:VFO CRS is ON, then no coarse with
the RIT knob.
>>
>> Is there any hidden setting I missed? Or died just this RIT/XIT
function on the board? I also couldn't see any broken lines or parts around
the RIT encoder on the PCB.
>>
>> I am curious if there is easy help oout there.
>>
>> 73s Chris DL1MGB
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
<http://mailman.qth.net/mailman/listinfo/elecraft>
>> Help: http://mailman.qth.net/mmfaq.htm
<http://mailman.qth.net/mmfaq.htm>
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net <http://www.qsl.net>
>> Please help support this email list: http://www.qsl.net/donate.html
<http://www.qsl.net/donate.html>
>> Message delivered to gt-i at gmx.net
>>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to hdv at kpnplanet.nl
More information about the Elecraft
mailing list