[Elecraft] SVGA Screen save to memory stick

[Barry Baines]

Don:

> On Sep 26, 2020, at 9:06 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Mike,
> 
> Connector #22 is a USB port for a keyboard, not a general USB port.  It is clearly labeled "KEYBOARD".

You're absolutely correct to note the labeling and I’ve always presumed that is the connector is only for a keyboard.  

However, the "P3 HIgh-Performance Owner’s Manual" (Revision F, 11 JAN 16 p.12) does have this description of that connector:

"KEYBOARD: USB jack for a USB keyboard or thumb drive (mass storage device). Apple keyboards are not supported at this time.”


So the wording does suggest compatibility with thumb drives, but from what I can tell there is no discussion in the “Owner’s Manual" about how to utilize a thumb drive.  Perhaps this may be a feature that was never actually developed.


FWIW,

Barry Baines, WD4ASW/1
(Currently in Boston/Roslindale, MA)


> 
> 73,
> Don W3FPR
> 
> On 9/26/2020 7:21 PM, Mike Flowers wrote:
>> I have successfully captured a P3 screen image.
>> Elecraft P3 Utility > Capture Image Tab> Capture Image button - this captures the image then displays 'Bitmap copied to Windows Clipboard' - then paste from the Clipboard into Paint or other app and save in the image format of your choice.
>> My P3 manual states:  "Connector openings {16}, {17}, {21}, and {22} are provided for future use."   I think #22 is the USB port on the back of the P3.
>