[Elecraft] KRX3 TMP Connectors

[Victor Rosenthal]

You don't need a lot of strength to do it! If it doesn't go in, probably 
the tip isn't going into the socket.  Check to see that  the tip is 
parallel to the shield portion of the connector. Make sure you are 
putting it in straight. Don't try to force it -- when you have it lined 
up right, it should go in.
Good luck.

73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
.

On 19/09/2020 18:57, Bob DeHaney wrote:
> I removed my KRX3 to install a new filter.  My problem is, I can't
> re-insert one of the TMP connectors. It simply doesn't seat.  I've
> inspected the Tip and it looks OK.
> 
> I'm 80 and don't have super hand strength, but the first connector
> went in normally.
> 
> Any suggestions?
> 
> 
> 
> Vy 73 de Bob DJ0RD/WU5T
> 
> 
> 
> ______________________________________________________________ 
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> k2vco.vic at gmail.com
>