[Elecraft] KPA-1500/FlexRadio 6400

[Michael Walker]

Mike

I keep reading what you wrote, but how can you tell the difference?  The
Band data is the only thing that the KPA500 requires to operate.  It really
doesn't care about the exact frequency.

If you change bands on the 6400 and the KPA500 tracks from 1 band to
another, then your installation is fine and you should be good to go.

I used a KPA500 for years on a Flex 6300 without issue.    For cables, all
that is required is a normal 9 pin male-female cable and then a Null Modem
Gender Bender adapter (yes, that is what they are called).

Mike va3mw




On Tue, Sep 15, 2020 at 7:33 PM Mike Stone <mstone36 at tampabay.rr.com> wrote:

> This is my first post.  I am not sure if or where the search function is
> located.
>
> I am running a KPA-1500 and a FlexRadio 6400.  The amplifier recognizes
> the band that the Flex is tuned to but it doesn’t recognize the frequency.
> Any help would be appreciated.  I am not technically proficient with either
> the Flex or the KPA-1500, so please keep it simple for me.
> Thanks
> Mike, N1VE
>
>
> Sent from Mail for Windows 10
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to va3mw at portcredit.net