[Elecraft] No Tx audio after WSJT upgrade

[Rich]

Nope.  I just changed the name of the codec for my 7300 from IC7300 
Audio In to IC7300a Audio In.  I rebooted Windows and WJST-X stills 
thinks it is IC7300 Audio In.  This is somewhat of a mute point as it is 
still the same codec and WJST-X still works fine.   My point is only 
that WJST-X is not refreshing from the sound panel after an install.

Rich

On 9/12/2020 19:57 PM, Neil Zampella wrote:
> Actually ... WSJT-X only uses what windows tells it is available.
> After Windows updates its been found that Windows will scramble the
> audio devices, especially if they are USB devices.
>
> What has been found to work is to RENAME the device you use in the Sound
> Control Panel.  Bring up the Sound Control Panel, find the USB adapter
> normally used for sound input to WSJT-X under Speakers and double click
> to open the properties.   On the first tab you can rename it to what you
> want to use, such as WSJT-X Sound OUT.   Do the same with the microphone
> device and rename to WSJT-X Sound IN.
>
> Click the OK button, and then close the Sound Control Panel.   I'd do a
> restart to make sure that Windows has saved that info.   Then open
> WSJT-X and select them on the Audio setting tab.
>
> Most of the users who have done this have not see the 'scrambled audio
> device' issue again.
>
> Neil, KN3ILZ
>
> On 9/12/2020 9:22 AM, Rich wrote:
>> WJST-X does a very poor job of loading the current sound devices from
>> Windows when you run the program.   It appears to load whatever
>> existed in the Sound Panel when it was installed.
>>
>> So use caution that what you see in the WJST-X audio window vs. what
>> actually exists in the Windows Sound Panel.
>>
>> To me it appears to be more of WJST-X issue that a Windows issue
>>
>> Maybe there is a way to fix this, but I do not know what it is.
>>
>> Rich
>>
>> On 9/12/2020 7:20 AM, Ian Kahn, NV4C wrote:
>>> Joe,
>>>
>>> Check your WSJT-X settings and ensure you still have the correct
>>> sound card selected and that something didn't change your output
>>> target/radio selection. Also, if you're running Windows, make sure
>>> something else didn't change any of your sound card settings from
>>> what you had prior to upgrading WSJT-X.
>>>
>>> 73 de,
>>>
>>> Ian, NV4C
>>>
>>> On 9/11/20 11:23 PM, W8JH wrote:
>>>> I was working FT8 tonight and decided to upgrade from WSJT 2.0 to
>>>> the latest
>>>> 2.2.
>>>>
>>>> Now I have no audio on transmit. All other functions work. Decodes,
>>>> band
>>>> change etc.
>>>>
>>>> It puts the K3s in transmit but no audio. I have adjusted the Mic gain
>>>> without effect.
>>>>
>>>> I double checked that WSJT has the K3s codec for transmit selected.
>>>> Windoze
>>>> shows it working as well.
>>>>
>>>> I’m totally stumped and wish I hadn’t upgraded now. Any ideas how to
>>>> proceed
>>>> ?
>>>>
>>>> 73,
>>>>
>>>>
>>>>
>>>> -----
>>>> 73,
>>>>
>>>> Joe, W8JH
>>>>
>>>> K3s, KPA 500, KAT 500 and  KX3 happy user.
>>>> -- 
>>>> Sent from: http://elecraft.365791.n2.nabble.com/
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to nv4c.ian at gmail.com
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to rwnewbould at comcast.net
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rwnewbould at comcast.net