[Elecraft] K1ZTE - KAT500

[Alan - G4GNX]

The KAT500 retains matched memories for each band/frequency per antenna. 
So yes, you have 3 solutions per band/frequency. It has quite a lot of 
memories. :-D

73,

Alan. G4GNX


------ Original Message ------
From: "w4sc" <w4sc at windstream.net>
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: 13/09/2020 00:38:08
Subject: Re: [Elecraft] K1ZTE - KAT500

>I have the KAT/KPA500 setup with the K3.  It works great when trained, tracking VFO.  I had only one antenna available per band at the time using the setup.  Currently the “shack” is undergoing a move and renovation.
>
>I will be back on with possibly as many as 3 antennas available on a single band.  I have looked for answer to the following question.
>
>Is the training saved per-BAND/ANTENNA combination tuning solution?.. possibly resulting in 3 solutions per band.  If there is only one solution there are implications in switching to a different antenna in a band with multiple antenna choices.  In my case the future may hold a vertical,  beam, and horizontal loop on 40M.
>
>Ben  W4SC
>
>